Negotiable
The date of payment from buyers deliver within days
Anhui
Long-term effective
2021-03-28 12:58
415
Company Profile
Fine Fasteners Industry Co., LtdBy certification [File Integrity]
Contact: hefeifaai(Mr.)
Email:
Telephone:
Phone:
Area: Anhui
Address: Anhui
Website: http://www.ffifasteners.com/ http://hefeifaai.nsysjx.com/
unit price:Negotiable
unit price:Negotiable
unit price:Negotiable
unit price:Negotiable
unit price:Negotiable
unit price:Negotiable
D Head Nail Making Machine Specification
MODEL |
FFI-ZDJ-D90 |
Maximum Nail Diameter |
3.5mm |
Minimum Nail Diameter |
2.0mm |
Maximum Nail Length |
90mm |
Minimum Nail Length |
45mm |
Nail Making Speed |
680pcs/min |
Rated Power |
7kw |
Dimensions |
1350mm*1220mm*1050mm |
Machine Weight |
2200kg |
The advantage of clipped head nail making machine
The D Head Nail Making Machine adopts a square guide column structure in the middle, which effectively guarantees the performance and stability. The produced D shaped nails (commonly known as the paper strip nails) can perfectly solve the problems of length, burrs and other issues. The service life of wearing parts such as cutters can be greatly improved without any misoperation.
Common Faults and Solutions
Fault phenomenon |
Reason |
Solution |
Uneven length of nails |
The nail cutter is blunt and has serious burrs |
Change the nail cutter |
Wire feeding click tooth surface gaps, 6mm adjustable bolt is pressed too closely |
Adjust 6mm bolt upper side |
|
Click for wire back is too skew, Four pieces of alloy have worn out |
Inspect and change |
|
Feeder is not going well |
Tidy up the feeder |
|
The feed nozzle is blocked |
Clean the feed nozzle |
|
Vice punch is out of the potholes and uneven |
Take off and grind the punch |
|
Clamp flat of nail shaft |
Belt is misaligned |
Adjust belt slider |
ring – shaped groove of nail dies isn't chamfered |
Check and adjust in time |
|
Bending wire not corrected |
||
The upper guide pillar is too tight and prevents belt from running |
Loosen the screw, move up guide rail so that there are gaps between belts |
|
Different sizes of nail heads |
thermal expansion and cold shrinkage |
|
Vice punch is out of the potholes and uneven |
Take off and grind the punch |
|
Scissor is blunt and has serious burrs |
Change the scissor |
|
Out-of-round nail head |
The nail die is broken |
Change the nail die |
Large clamping gap of nail dies |
Repair nail dies |
|
Wrong net angle |
Repair net |
|
Bald head |
||
There are stairs of nail heads |
The nail head is out of round |
|
The right size |
||
Double heads |
Adjust the vice punch to make nail head plump |
|
Obvious camber in the clamp mark |
Misalignment of belt and nail mold center |
Adjust in time and check frequently |
Stop |
Lack of material |
Rethread |
Wire knotted |
Organize wires |
|
Lack of nail |
Check the wire feed clip, press the start button after inching the probe |
|
Blockage of nails |
Check nail bucket |
|
Inverter protection |
Press the STOP button at the bottom right corner of the inverter |
|
wire feed slider overheating protection |
Oil pump is short of oil, refuel in time |
|
the electric cabinet light is on, the motor doesn't run |
With the punch against the nail, turn the manual wheel to turn the punch past the highest point |
|
Lack of material |
Rethread |
|
Can't turn on the machine |
Manual wheel is not pulled out, electrical protection |
Pull out the manual wheel |
Site requirements for nail production equipment
The height of the workshop is more than 2.5 meters, the length is more than 22 meters, and the width is more than 6 meters (installed side by side). The above includes raw material storage, from production equipment to finished product, sorting, packaging, and storage.
Finished Product
Our After-Sale Service
● Make response on customers' inquiry or requirement within 12 hours.
● Assist customers to choose the most suitable machine, give them professional suggestion.
● Schedule machine production by our skilled team according to customers' demands.
● Offer customers manual instruction or video for machine to help them operate machine correctly.
● Provide customer layout of workshop with machine to help them complete the machine installation.
● Assign engineer to assist customer to install machine if necessary.
● Offer one year guarantee for concrete nail making machine.
● Offer spare parts to customer no matter whether in guarantee or not as soon as we get feedback from customer.
http://www.ffifasteners.com/